Bin Safety
Farm Bin Specs |
|
Sukup’s stiffened and non-stiffened bins
are designed for stir drying with three or fewer down auger stirring machines. If
you're using a stirring machine with four or more down augers, a horizontal, bottom
unload system, a top dry system, or a recirculator with a center, vertical unload,
a Sukup Heavy-Gauge Drying Bin is what you need. Sukup Heavy-Gauge Bins were specifically
designed for the demands of these in-bin continuous flow drying systems. They are
available stiffened or non-stiffened and can be pre-punched for Sukup Fastir™ stirring
machine track. |
|
Proper moisture and air movement are essential
for effective drying. Sukup Bins are built with that in mind. 32° pitch on the roof
allows moisture to drain off easily. Sukup roof clips are designed to give the eave
clearance you need. The “up” or drying position provides additional eave clearance
to allow moisture-saturated air to escape. Sukup roof sheets are available pre-punched
for 18” roof vents. The pre-punched vent holes have an extruded lip that prevents
moisture from rolling down the bin roof and into the bin.
|
|